Published June 2011
| Version v1
Journal article
Heat flux tests of the ITER first Wall qualification mockups at KoHLT-1
- 1. Korea Atomic Energy Research Institute, 1045 Daedeokdaero, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of)
Description
As a party of the ITER, especially as a procurement party of the ITER blanket, we have designed the first wall qualification mockup (FWQM) and fabricated four FWQMs. Two of them have been tested up to 12,690/12,020 cycles at a heat flux higher than 0.625 MW/m2 at the KoHLT-1 facility established in the Korea Atomic Energy Research Institute (KAERI). They successfully passed the normal heat flux tests, and there was no indication of a defect in the Be-to-CuCrZr joints.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.fusengdes.2011.03.076Additional details
Identifiers
- DOI
- 10.1016/j.fusengdes.2011.03.076;
- PII
- S0920-3796(11)00349-8;
Publishing Information
- Journal Title
- Fusion Engineering and Design
- Journal Volume
- 86
- Journal Issue
- 4-5
- Journal Page Range
- p. 412-416
- ISSN
- 0920-3796
- CODEN
- FEDEEE
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 43065223
- Subject category
- S70: PLASMA PHYSICS AND FUSION TECHNOLOGY;
- Descriptors DEI
- FIRST WALL; HEAT FLUX; ITER TOKAMAK; MOCKUP
- Descriptors DEC
- CLOSED PLASMA DEVICES; STRUCTURAL MODELS; THERMONUCLEAR DEVICES; THERMONUCLEAR REACTOR WALLS; THERMONUCLEAR REACTORS; TOKAMAK DEVICES; TOKAMAK TYPE REACTORS
Optional Information
- Copyright
- Copyright (c) 2011 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.