Evaluation of Rock Stress Estimation by the Kaiser effect

The knowledge of in situ stress is the key input parameter in many rock mechanics analyses. Information on stress allows the definition of boundary conditions for various modelling and engineering tasks. Presently, the estimation of stresses in bedrock is one of the most difficult, time-consuming and high-priced rock mechanical investigations. In addition, the methods used today have not evolved significantly in many years. This brings out a demand for novel, more economical and practical methods for stress estimation. In this study, one such method, Kaiser effect based on acoustic emission of core samples, has been evaluated. It can be described as a 'memory' in rock that is indicated by a change in acoustic emission emitted during uniaxial loading test. The most tempting feature of this method is the ability to estimate the in situ stress state from core specimens in laboratory conditions. This yields considerable cost savings compared to laborious borehole measurements. Kaiser effect has been studied in order to determine in situ stresses for decades without any major success. However, recent studies in Australia and China have been promising and made the estimation of stress tensor possible from differently oriented core samples. The aim of this work has been to develop a similar estimation method in Finland (including both equipment and data reduction), and to test it on samples obtained from Olkiluoto, Eurajoki. The developed measuring system proved to work well. The quality of obtained data varied, but they were still interpretable. The results obtained from these tests were compared with results of previous overcoring measurements, and they showed quite good correlation. Thus, the results were promising, but the method still needs further development and more testing before the final decision on its feasibility can be made. (orig.)