Graphene oxide/poly(2-methylaniline) composite particle suspension and its electro-response

Graphene oxide (GO)/poly(2-methylaniline) (P2MAN) composite particles were prepared by chemical oxidation polymerization and adopted as an electrorheological (ER) material. Because of its electrical conductivity originating from both semi-conducting P2MAN and GO, it could be tuned finely using P2MAN for ER applications. The morphology and chemical structure of the composite were examined by scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The ER properties of the GO/P2MAN composite particles dispersed in silicone oil were examined with and without an applied electric field. The fibrillation phenomenon of this GO/P2MAN-based electro-responsive fluid was also observed by optical microscopy under an electric field. The flow curves and dynamic modulus of the GO/P2MAN suspension were measured by rotational rheometry under a range of electric field strengths, exhibiting typical ER characteristics and a slope of the dynamic yield stress of 1.5. GO appeared to improve the compatibility of the composite particles within the medium, which resulted in improved sedimentation stability compared to that of the P2MAN-based ER fluid. - Highlights: • GO/P2MAN composite was fabricated by Hummers method and oxidation polymerization. • The composite particles based fluid exhibited typical electrorheological properties. • The fluid was correlated to conduction model and showed solid-like characters. • GO was helpful to improve stability of fluid due to large surface area and compatibility