Published December 1, 2018
| Version v1
Journal article
Recycled Natural Rubber Latex Gloves Filled CR Rubber: The Effects of Filler Size and loading
Creators
- 1. Center of Excellence Geopolymer and Green Technology (CEGeoGTech), Faculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP), 02100 Perlis (Malaysia)
- 2. Chemistry Department, College of Sciences, Kirkuk University, Kirkuk (Iraq)
- 3. School of Housing Building and Planning, Universiti Sains Malaysia, 11800 Minden, Penang (Malaysia)
- 4. Iraqi Ministry of Education - Directorate of Anbar Education (Iraq)
Description
The effect of (rNR-G) as a filler with different size and loading on curing characteristics (scorch time, cure time, minimum and maximum torque) and physical properties (swelling test, crosslink density and hardness test) on rNR-G/CR (chloroprene) were investigated. Two sizes of fillers (fine size and coarse size) were utilized with different loadings (0, 5, 10, 15, 20 and 25 phr) for each size. The results indicated, the optimum cure characteristics for the (rNR-G)/CR compounds were at 5 phr for the fine size, meanwhile, for the physical properties, the hardness increased with the increasing of filler loading, and gave higher values in the case of fine size. (paper)
Availability note (English)
Available from http://dx.doi.org/10.1088/1757-899X/454/1/012189Additional details
Identifiers
Publishing Information
- Journal Title
- IOP Conference Series. Materials Science and Engineering (Online)
- Journal Volume
- 454
- Journal Issue
- 1
- Journal Page Range
- [5 p.]
- ISSN
- 1757-899X
Conference
- Title
- International Conference on Materials Engineering and Science
- Dates
- 8 Aug 2018
- Place
- Istanbul (Turkey)
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 52101950
- Subject category
- S36: MATERIALS SCIENCE; S37: INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY;
- Resource subtype / Literary indicator
- Conference
- Descriptors DEI
- CURING; DENSITY; GLOVES; LATEX; NATURAL RUBBER; NEOPRENE
- Descriptors DEC
- CLOTHING; ELASTOMERS; ORGANIC CHLORINE COMPOUNDS; ORGANIC COMPOUNDS; ORGANIC HALOGEN COMPOUNDS; ORGANIC POLYMERS; PHYSICAL PROPERTIES; POLYMERS; PROTECTIVE CLOTHING; RUBBERS