Published March 28, 2013 | Version v1
Journal article

Preparation and Oxidation of ZrB2/SiC/Zr2Al4C5 Multi-phase Ceramics with Spark Plasma Sintering

  • 1. State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China)
  • 2. Sinoma International Engineering CO., Ltd.(Nanjing), 106 Jiangjun avenue, Nanjing Jiangsu 211100 (China)

Description

The ZrB2/SiC/Zr2Al4C5 multi-phase ceramics were fabricated by spark plasma sintering (SPS) at 1800 °C for 3 min under 20 MPa in an vacuum. Oxidation behavior of multi-phase ceramics were investigated using thermo gravimetric analysis (TGA) from 20 °C to 1500 °C and muffle furnace in stagnant air at 1200 °C. Samples were analyzed after oxidation by X-ray diffraction (XRD), scanning electron microscopy (SEM) along with energy dispersive spectroscopy (EDS) to determine the reaction products and to observe the microstructure. The results showed that the aluminium borate and mullite crystallize on the surface in the samples oxidized. The effect of Zr2Al4C5 content on the oxidation resistance of the ZrB2 ceramics were discussed respectively, and oxidation mechanism was also analysised.

Availability note (English)

Available from http://dx.doi.org/10.1088/1742-6596/419/1/012030

Additional details

Publishing Information

Journal Title
Journal of Physics. Conference Series (Online)
Journal Volume
419
Journal Issue
1
Journal Page Range
[5 p.]
ISSN
1742-6596

Conference

Title
12. international symposium on multiscale, multifunctional and functionally graded materials
Acronym
FGM 2012
Dates
22 Oct 2012
Place
Beijing (China)