The low-temperature aging embrittlement in a 2205 duplex stainless steel
Creators
Description
The effect of isothermal treatment (at temperatures ranging between 400 and 500 deg. C) on the embrittlement of a 2205 duplex stainless steel (with 45 ferrite-55 austenite, vol.%) has been investigated. The impact toughness and hardness of the aged specimens were measured, while the corresponding fractography was studied. The results show that the steel is susceptible to severe embrittlement when exposed at 475 deg. C; this aging embrittlement is analogous with that of the ferritic stainless steels, which is ascribed to the degenerated ferrite phase. High-resolution transmission electron microscopy reveals that an isotropic spinodal decomposition occurred during aging at 475 deg. C in the steel studied; the original δ-ferrite decomposed into a nanometer-scaled modulated structure with a complex interconnected network, which contained an iron-rich BCC phase (α) and a chromium-enriched BCC phase (α'). It is suggested that the locking of dislocations in the modulated structure leads to the severe embrittlement
Additional details
Identifiers
- DOI
- 10.1016/j.msea.2003.12.051;
- PII
- S0921509304000590;
Publishing Information
- Journal Title
- Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
- Journal Volume
- 379
- Journal Issue
- 1-2
- Journal Page Range
- p. 119-132
- ISSN
- 0921-5093
- CODEN
- MSAPE3
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 37059939
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- AGING; AUSTENITE; BCC LATTICES; CHROMIUM; DECOMPOSITION; DISLOCATIONS; EMBRITTLEMENT; FERRITE; FERRITIC STEELS; FRACTOGRAPHY; HARDNESS; IRON; STAINLESS STEELS; TEMPERATURE RANGE 0400-1000 K; TRANSMISSION ELECTRON MICROSCOPY
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; CHEMICAL REACTIONS; CRYSTAL DEFECTS; CRYSTAL LATTICES; CRYSTAL STRUCTURE; CUBIC LATTICES; ELECTRON MICROSCOPY; ELEMENTS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; LINE DEFECTS; MECHANICAL PROPERTIES; METALS; MICROSCOPY; STEELS; TEMPERATURE RANGE; TRANSITION ELEMENT ALLOYS; TRANSITION ELEMENTS
Optional Information
- Copyright
- Copyright (c) 2004 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.