Hybrid bundle divertor design

A hybrid bundle divertor design is presented that produces <0.3% magnetic ripple at the center of the plasma while providing adequate space for the coil shielding and structure for a tokamak fusion test reactor similar to the International Tokamak Reactor and the Engineering Test Facility (with R = 5 m, B = 5 T, and a /SUB wall/ = 1.5 m, in particular). This hybrid divertor consists of a set of quadrupole ''wing'' coils running tangent to the tokamak plasma on either side of a bundle divertor. The wing coils by themselves pull the edge of the plasma out 1.5 m and spread the thickness of the scrape-off layer from 0.1 to 0.7 m at the midplane. The clear aperture of the bundle divertor throat is 1.0 m high and 1.8 m wide. For maintenance or replacement, the hybrid divertor can be disassembled into three parts, with the bundle divertor part pulling straight out between toroidal field coils and the wing coils then sliding out through the same opening