Published October 19, 1979 | Version v1
Report Restricted

Inertia and friction welding of aluminum alloy 1100 to type 316 stainless steel

Creators

Description

The inertia and friction-welding processes were evaluated for joining aluminum alloy 1100-H14 and Type 316 vacuum-induction melted, vacuum-arc remelted (VIM VAR) stainless steel. While both processes consistently produced joints in which the strength exceeded the strength of the aluminum base metal, 100 percent bonding was not reliably achieved with inertia welding. The deficiency points out the need for development of nondestructive testing techniques for this type of joint. Additionally, solid-state volume diffusion did not appear to be a satisfactory explanation for the inertia and friction-welding bonding mechanism

Availability note (English)

MF available from INIS under the Report Number; Available from NTIS., PC A03/MF A01.

Files

Restricted

The record is publicly accessible, but files are restricted to users with access.

Additional details

Publishing Information

Imprint Pagination
27 p.
Report number
Y--2165(Rev.)

INIS

Country of Publication
United States
Country of Input or Organization
United States
INIS RN
11516917
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
ALUMINIUM BASE ALLOYS; BONDING; FRICTION WELDING; INTERFACES; MOMENT OF INERTIA; STAINLESS STEEL-316; WELDED JOINTS
Descriptors DEC
ALLOYS; ALUMINIUM ALLOYS; CARBON ADDITIONS; CHROMIUM ALLOYS; CHROMIUM STEELS; CHROMIUM-NICKEL STEELS; CORROSION RESISTANT ALLOYS; FABRICATION; HEAT RESISTING ALLOYS; IRON ALLOYS; IRON BASE ALLOYS; JOINING; JOINTS; MOLYBDENUM ALLOYS; NICKEL ALLOYS; STAINLESS STEELS; STEELS; TRANSITION ELEMENT ALLOYS; WELDING