Published September 1, 2017 | Version v1
Journal article Metadata-only

Improving upset forgingtube billettechnology to avoid the clamp defect on semi-axle housingforging

Creators

  • 1. Kazan Federal University, Naberezhnye Chelny Institute, pr. Mira 68/19, Naberezhnye Chelny, Republic of Tatarstan, Russia, 423812 (Russian Federation)
  • 2. Forging Plant of KAMAZ, pr. Avtozavodsky2, Naberezhnye Chelny, Republic of Tatarstan, Russia, 423827 (Russian Federation)

Description

Upset forging with heating on the limited site is simulated. Advantage of type-setting conversion formation method application with a punch in the form of a cone is confirmed. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/240/1/012055

Additional details

Identifiers

DOI
10.1088/1757-899X/240/1/012055;

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
240
Journal Issue
1
Journal Page Range
[4 p.]
ISSN
1757-899X

Conference

Title
International scientific-technical conference on innovative engineering technologies, equipment and materials
Acronym
ISTC-IETEM-2016
Dates
7-9 Dec 2016
Place
Kazan (Russian Federation)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
50052833
Subject category
S42: ENGINEERING;
Resource subtype / Literary indicator
Conference
Descriptors DEI
CONES; DEFECTS; FORGING; HEATING; SIMULATION; TECHNOLOGY ASSESSMENT
Descriptors DEC
FABRICATION; MATERIALS WORKING