Understanding dielectrophoretic trapping of neuronal cells: modelling electric field, electrode-liquid interface and fluid flow

By application of dielectrophoresis neuronal cells can be trapped successfully. Several trapping experiments have been performed using a quadrupole electrode structure at different amplitudes (1, 3, and 5 Vpp) and frequencies (10-50 MHz). Due to the high conductivity of the suspending medium negative dielectrophoretic forces are created. The dielectrophoretic force is determined by the gradient of the electric field. However, the electrode-liquid interfaces are responsible for decreased electric field strengths, and thus decreased field gradients, inside the medium, especially at lower frequencies. Circuit modelling is used to determine the frequency-dependent electric field inside the medium. The creation of an electric field in high conductivity of the medium results in local heating, which in turn induces fluid flow. This flow also drives the neurons and was found to enhance the trapping effect of the dielectrophoretic force. With the use of finite element modelling, this aspect was investigated. The results show that the dielectrophoretic force is dominating just above the substrate. When the upward dielectrophoretic force is large enough to levitate the cells, they may be dragged along with the fluid flow. The result is that more cells may be trapped than expected on the basis of dielectrophoresis alone. (author)