Biolixiviation of uranium and metals derived from uranium deposits
- 1. Comisión Nacional de Energía Atómica (CNEA), Ezeiza (Argentina) Biominería y Biotecnología Ambiental
- 2. Comisión Nacional de Energía Atómica (CNEA), General San Martín, Buenos Aires (Argentina) Centro Atómico Constituyentes (CAC) Procesos Químicos e Ingeniería
Description
Uranium extraction for the production of nuclear fuels is of great interest in Argentina, since the reactivation of local nuclear activity. They are obtained by chemical leaching techniques, which were found to reach 90% extraction yield. However, the other 10% represents an important annual amount of money that could be of interest to recover. On the other hand, microbial leaching is another technique that could be used as an additional step to optimize the whole process, because of its low costs and maintenance, and also could be used to recover elements that were considered lost if not treated. In this work, mineral dumps previously leached were used. This mineral from an argentine low-grade ore contains 180,0 mg/kg of uranium, 85,8 mg/kg of molybdenum and 10.677 mg/kg of iron, after leaching. Particle size was reduced to less than 0,150mm by milling the dumps, and it was used at 10% pulp density in culture media for bioleaching studies. Three different conditions were tested: (1) sterilized dumps treated with gamma ionizing radiation, 50 kGy dose at the PISI, CAE, (2) mineral dumps with no other treatment, used as received, and (3) mineral dumps inoculated with Acidiphilium acidophilum, mesophile, acidophile, mixotrophic and sulfur-oxidizing bacteria, previously cultured till exponential growth phase was obtained. 99,1% of uranium and 19,0% of molybdenum were recovered after 82 days at 30°C, although only 82,5% of U and 0,5% of Mo were determined for non-inoculated condition, and 84,6% of U and 0,2% of Mo for sterilized mineral dumps. (author)
Abstract (Spanish)
La extracción de uranio para la producción de combustibles nucleares resulta de gran interés a nivel local desde la reactivación de la actividad nuclear en Argentina. El mismo se obtiene convencionalmente por técnicas de lixiviado químico, que permiten obtener rendimientos de casi el 90%. Sin embargo, el 10% residual constituye una gran suma económica anual de desperdicio que es de interés recuperar. Por otro lado, la biolixiviación nos brinda una herramienta adicional para optimizar el proceso, dado que se trata de una técnica de bajo costo y mantenimiento, contribuyendo a una explotación factible y rentable, y a la recuperación de metales que de otra forma se consideran perdidos. En el presente trabajo se utilizaron colas de mineral tratado a escala laboratorio proveniente de un yacimiento de Argentina. Este mineral se caracteriza por ser de baja ley, y con tiene 180,0 mg/kg de Uranio residual luego de su procesamiento por lixiviación química, así como también 10.677 mg/kg de Hierro y 85,8 mg/kg de Molibdeno. El mineral fue molido a un tamaño de partícula inferior a 0,150 mm, y fue utilizado al 10% de densidad de pulpa en medio de cultivo para los estudios de biolixiviación. Se ensayaron 3 condiciones diferentes: (1) mineral esterilizado mediante radiación ionizante gamma, en una dosis de 50kGy en la PISI, CAE, (2) mineral tal cual recibido luego del lixiviado químico, y (3) mineral inoculado con Acidiphilium acidophilum, microorganismos mesófilos, acidófilos, mixotróficos y oxidantes de azufre, previamente cultivados y en fase de crecimiento exponencial. Los resultados obtenidos fueron una recuperación del 99,1% de U y 19,0% de Mo en agitación a 30ºC durante 82 días, mientras que en la condición sin inoculación, se recuperaron solamente 82,5% de U y 0,5% de Mo, y 84,6% de U y 0,2% de Mo para el mineral esterilizado. (author)Files
51100296.pdf
Files
(1.3 MB)
Name | Size | Download all |
---|---|---|
md5:aa0a28a4cb68178c9eec06e56b044219
|
1.3 MB | Preview Download |
Additional details
Additional titles
- Original title (Spanish)
- Biolixiviación de uranio y metales derivados de yacimientos uraníferos
Publishing Information
- Publisher
- AATN
- Imprint Place
- Buenos Aires (Argentina)
- Imprint Title
- XLIII Annual meeting of the Argentine Association of Nuclear Technology (AATN 2016)
- Imprint Pagination
- vp.
- Journal Page Range
- 9 p.
- Report number
- INIS-AR-C--1909
Conference
- Title
- 43. Annual meeting of the Argentine Association of Nuclear Technology: Nuclear Energy in the Climate Change. Before It's too late
- Original Conference Title
- AATN 2016: 43. Reunión Anual de la Asociación Argentina de Tecnología Nuclear: La Energía Nuclear en el Cambio Climático. Antes de que sea tarde
- Acronym
- AATN 2016
- Dates
- 21-25 Nov 2016
- Place
- Buenos Aires (Argentina)
INIS
- Country of Publication
- Argentina
- Country of Input or Organization
- Argentina
- INIS RN
- 51100296
- Subject category
- S11: NUCLEAR FUEL CYCLE AND FUEL MATERIALS;
- Resource subtype / Literary indicator
- Conference
- Descriptors DEI
- MICROBIAL LEACHING; MINERALS; NUCLEAR FUELS; URANIUM; URANIUM DEPOSITS
- Descriptors DEC
- ACTINIDES; DISSOLUTION; ELEMENTS; ENERGY SOURCES; FUELS; GEOLOGIC DEPOSITS; LEACHING; MATERIALS; METALS; MINERAL RESOURCES; REACTOR MATERIALS; RESOURCES; SEPARATION PROCESSES
Optional Information
- Lead record
- ersb4-nhh57
- Notes
- 7 refs., 5 figs. Imprint:XLIII Reuni#Latin Small Letter O With Acute#n Anual de la Asociaci#Latin Small Letter O With Acute#n Argentina de Tecnolog#Latin Small Letter I With Acute#a Nuclear (AATN 2016)