Creep of V-4Cr-4Ti in a lithium environment
Creators
Description
Biaxial creep specimens of V-4Cr-4Ti were exposed to liquid lithium at 665 and 765 deg. C to complement similar tests in a vacuum environment. Although the Li tests are at an early stage, results are consistent with those of the vacuum tests. At 765 deg. C, exposures of nearly 2000 h have been reached, and at 665 deg. C, 1100 h have been attained. There is only a brief period of steady-state creep, a power law stress dependence is observed, and temperature dependence is described by an activation energy slightly lower than that of self-diffusion, 2.8 eV. At this stage, even the vacuum tests had little increase in oxygen so that the similarity is not unexpected. No creep failures have been observed. This is expected based upon comparison with vacuum tests on similar specimens and with uniaxial tests with specimens of the same heat of V-4Cr-4Ti
Additional details
Identifiers
- PII
- S0022311502010176;
Publishing Information
- Journal Title
- Journal of Nuclear Materials
- Journal Volume
- 307-311
- Journal Issue
- 1-4
- Journal Page Range
- p. 615-619
- ISSN
- 0022-3115
- CODEN
- JNUMAM
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 34014260
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ACTIVATION ENERGY; CHROMIUM ALLOYS; CREEP; LIQUID METALS; LITHIUM; TEMPERATURE RANGE 0400-1000 K; TITANIUM ALLOYS; VANADIUM BASE ALLOYS
- Descriptors DEC
- ALKALI METALS; ALLOYS; ELEMENTS; ENERGY; FLUIDS; LIQUIDS; MECHANICAL PROPERTIES; METALS; TEMPERATURE RANGE; TRANSITION ELEMENT ALLOYS; VANADIUM ALLOYS
Optional Information
- Copyright
- Copyright (c) 2002 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.