Published 1984
| Version v1
Book
Design considerations of the IUCF cooler dipole magnet vacuum can
Description
Various stainless steel alloys were investigated for use in constructing vacuum cans for the IUCF Cooler dipole magnets. The wall deflection due to vacuum forces was measured. The outgassing rate after the chosen surface treatment was determined. Interesting results on the measured magnetic properties of welds were obtained. A scheme for vacuum bakeout was developed and heat loss thru that thermal insulation was measured
Additional details
Publishing Information
- Publisher
- Institute of Electrical and Electronics Engineers, Inc.
- Imprint Place
- New York, NY (USA)
- Imprint Title
- Tenth international conference on cyclotrons and their applications
- Journal Page Range
- p. 145-146.
Conference
- Title
- 10. international conference on cyclotrons and their applications.
- Dates
- 30 Apr - 3 May 1984.
- Place
- East Lansing, MI (USA).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 17073137
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference
- Descriptors DEI
- BAKING; FABRICATION; IU CYCLOTRON; MAGNETS; STAINLESS STEELS; VACUUM SYSTEMS; WELDING
- Descriptors DEC
- ACCELERATORS; ALLOYS; CARBON ADDITIONS; CYCLIC ACCELERATORS; CYCLOTRONS; EQUIPMENT; HEATING; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; ISOCHRONOUS CYCLOTRONS; JOINING; STEELS