Published November 2008 | Version v1
Journal article

Phase constituents and microstructure of laser synthesized TiB2-TiC reinforced composite coating on steel

  • 1. School of Materials Science and Engineering, Shandong University, Jinan 250061 (China)
  • 2. Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States)

Description

The synthesis of hard composite coating reinforced with TiB2-TiC on steel using laser surface engineering has been investigated. Phase evolution was analyzed by correlating the experimental results with thermodynamic calculation performed by ThermalcalcTM software. The composite coating consists of α-Fe, γ-(Fe,Ni), TiB2, TiC and Fe3(B,C). Microstructure characterization reveals micro-sized blocky particles and submicron-sized spherical particles. Compared with the steel substrate, an improvement of microhardness value (3-4 times) was observed for the composite coating

Availability note (English)

Available from http://dx.doi.org/10.1016/j.scriptamat.2008.07.035

Additional details

Identifiers

DOI
10.1016/j.scriptamat.2008.07.035;
PII
S1359-6462(08)00562-9;

Publishing Information

Journal Title
Scripta Materialia
Journal Volume
59
Journal Issue
10
Journal Page Range
p. 1147-1150
ISSN
1359-6462
CODEN
SCMAF7

Optional Information

Copyright
Copyright (c) 2008 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.