Published November 1988 | Version v1
Journal article

Oxidation and corrosion resistance of TbFeCoPt alloy films

  • 1. Eastman Kodak Co., Rochester, NY (USA)
  • 2. Eastman Kodak Research Labs., Rochester, NY (USA)

Description

The effect of Pt addition on the oxidation and corrosion resistance of the TbFeCo magnetooptic films prepared from alloy targets by d.c. magnetron sputtering has been studied. The addition of 5 - 10 at% of Pt to TbFeCo increased its environmental stability, reduced pinhole formation, and increased corrosion potential without significantly affecting the magneto-optical properties. Auger depth profiles indicated that the oxide on TbFeCo films after accelerated aging was thicker than that on TbFeCoPt films. X-ray photo-electron spectroscopy (XPS) was used to study in-situ oxidation of clean TbFeCoPt films under 5 x 10-7 Torr at oxygen at room temperature. Results indicated that Pt remained in the metallic form whereas Tb and Fe were oxidized at the surface. An oxygen-induced segregation of Tb to the surface was also observed

Additional details

Publishing Information

Journal Title
IEEE Transactions on Magnetics
Journal Volume
24
Journal Issue
6
Series
IEEE Trans. Magn.
Journal Page Range
2449-2451
ISSN
0018-9464
CODEN
IEMGA