Published 1996 | Version v1
Journal article Metadata-only

Study of influence of isothermal plastic deformation with low strain rates on structure and properties of ZhS6KP nickel alloy

Creators

Description

A study was made into the possibility to increase fatigue strength and long-term rupture strength with preservation of short-term mechanical properties in heat-resistant alloy type ZhS6KP due to plastic deformation with low rates before heat treatment. It was shown that hot working at 1160 deg C with 6-10% reduction and low strain rates with subsequent air quenching (1160 deg C, 4 h) and ageing (950 deg C, 2 h) allows to increase the time to fracture by a factor of 1.5 and fatigue strength by 50 N/mm2. 3 tabs

Additional details

Additional titles

Original title (Russian)
Исследование влияния изотермической пластической деформации с низкими скоростями на структуру и свойства никелевого сплава ЖС6КП

Publishing Information

Journal Title
Metallovedenie i Termicheskaya Obrabotka Metallov
Journal Issue
no.7
Journal Page Range
p. 31-33.
ISSN
0026-0819
CODEN
MTOMAX

INIS

Country of Publication
Russian Federation
Country of Input or Organization
Russian Federation
INIS RN
28020766
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
AGING; FATIGUE; NICKEL BASE ALLOYS; PRESSING; QUENCHING; S-N DIAGRAM; STRAIN RATE; TENSILE PROPERTIES
Descriptors DEC
ALLOYS; DIAGRAMS; FABRICATION; HEAT TREATMENTS; INFORMATION; MATERIALS WORKING; MECHANICAL PROPERTIES; NICKEL ALLOYS; TRANSITION ELEMENT ALLOYS