Preparation, characterization, and reactivity of Pt/SDBC catalysts for the hydrogen - water isotopic exchange reaction

Pt/SDBC catalysts, which are used for the hydrogen-water isotopic exchange reaction, were prepared. TGA experiments showed that the treatment temperature of Pt/SDBC catalysts in inert gas is limited to 400 deg C and the maximum allowable heat treatment temperature in oxygen is 200 deg C. From nitrogen adsorption and hydrogen chemisorption measurements, it was shown that the dispersion of platinum particles depended on the physical properties, i.e., specific surface area and pore structure of SDBC. It was found that the heat treatment could not impact the structure of SDBC and the oxygen treatment at 150 deg C improved the platinum dispersion. It was shown by XPS analysis that the oxygen treatment of impregnated Pt/SDBC increased the fraction of platinum metal state and platinum dispersion. As the supported platinum area increases, the catalytic activity of Pt/SDBC for the hydrogen-water vapor isotopic exchange reaction increases. It indicates that the hydrogen chemisorption measurement can be used to estimate the catalytic activities of Pt/SDBC catalysts. It was not observed that the particle size of supported platinum affected the specific reaction rate at 60 deg C. It implies that this reaction is structure insensitive. (author)