Published 1984
| Version v1
Journal article
Study on molybdenum base alloy granules fabricated under impulse discharge conditions
Description
The investigation of the structure and properties of alloy granules of the composition Mo-1.2% Ti-0.35%C and Mo-3.1% Ti-0.8%C obtained as a result of titanium and carbon deposition from gas phase on molybdenum powder under impulse discharge conditions is carried out. The alloy granules have been studied by the methods of chemical metallographic and X-ray structural analysis and measured their microhardness and specific surface. It has been found that the deposited elements in case of alloy solidification form fine-dispersed carbide inclusions in matrix metal causing its hardening
Additional details
Additional titles
- Original title (Russian)
- Исследование гранул сплавов на основе молибдена, полученных в импульсном разряде
Publishing Information
- Journal Title
- Izv. Vyssh. Uchebn. Zaved., Chern. Metall.
- Journal Issue
- no.5
- Series
- Izv. Vyssh. Uchebn. Zaved., Chern. Metall.
INIS
- Country of Publication
- USSR
- Country of Input or Organization
- USSR
- INIS RN
- 16013065
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CARBON ADDITIONS; CHEMICAL VAPOR DEPOSITION; ELECTRIC DISCHARGES; FLUIDIZED BEDS; GRANULAR MATERIALS; MICROHARDNESS; MICROSTRUCTURE; MOLYBDENUM BASE ALLOYS; PULSES; TITANIUM ALLOYS
- Descriptors DEC
- ALLOYS; CHEMICAL COATING; CRYSTAL STRUCTURE; DEPOSITION; HARDNESS; MATERIALS; MECHANICAL PROPERTIES; MOLYBDENUM ALLOYS; SURFACE COATING