Published January 1984
| Version v1
Journal article
The fabrication and mechanical properties of Ta-V (0-60 at.%) alloys
Description
Commercial purity Ta-V alloys containing 0-60 at.% V were fabricated into wire at room temperature. Reductions in area of greater than 99% were possible without intermediate annealing. TaV2 was present in the 50 and 60 at.% V alloys. Recrystallization and mechanical property data are given. Alloys containing 0-40 at.% V have a low rate of work hardening and good properties at 10000C, and they do not show a ductile-to-brittle transition down to -1950C. (Auth.)
Additional details
Publishing Information
- Journal Title
- J. Less-Common Met.
- Journal Volume
- 96
- Series
- J. Less-Common Met.
- Journal Page Range
- 275-281
- ISSN
- 0022-5088
INIS
- Country of Publication
- Switzerland
- Country of Input or Organization
- Switzerland
- INIS RN
- 15030543
- Subject category
- S36: MATERIALS SCIENCE; S36: MATERIALS SCIENCE;
- Resource subtype / Literary indicator
- Numerical Data
- Descriptors DEI
- ANNEALING; CASTING; CHEMICAL COMPOSITION; DUCTILITY; EXPERIMENTAL DATA; LOW TEMPERATURE; MEDIUM TEMPERATURE; QUANTITY RATIO; RECRYSTALLIZATION; STRAIN HARDENING; SWAGING; TANTALUM ALLOYS; ULTIMATE STRENGTH; VANADIUM ALLOYS; VERY HIGH TEMPERATURE; VICKERS HARDNESS; WIRES
- Descriptors DEC
- ALLOYS; DATA; FABRICATION; HARDENING; HEAT TREATMENTS; INFORMATION; MATERIALS WORKING; MECHANICAL PROPERTIES; NUMERICAL DATA; TENSILE PROPERTIES