Published January 2006
| Version v1
Journal article
Mechanical properties of ZhS32 superalloy at 1150-1250 deg C
Description
Mechanical properties of alloy ZhS32 single crystals at strain rates of 3 x 10-5, 10-4, 10-3 s-1 at temperatures of 1150-1250 deg C are determined as well as true plasticity values on long-term rupture strength tests. Tensile tests at temperatures above 1150 deg C show that alloy plasticity increases with temperature and its strength decreases. The strength grows in value with strain rate at given temperature
Abstract (Russian)
Определены механические свойства монокристаллов сплава ЖС32 при скоростях деформации 3 х 10-5, 10-4, 10-3 с-1 и температурах 1150-1250 град С, а также значения истинной пластичности при испытаниях на длительную прочность. Испытания на растяжение при температурах выше 1150 град С показали, что с ростом температуры испытания происходит увеличение пластических характеристик сплава и уменьшение прочностныхAdditional details
Additional titles
- Original title (Russian)
- Механические свойства жаропрочного сплава ЖС32 при 1150–1250 °C
Publishing Information
- Journal Title
- Metallovedenie i Termicheskaya Obrabotka Metallov
- Journal Issue
- no.1
- Journal Page Range
- p. 38-40
- ISSN
- 0026-0819
- CODEN
- MTOMAX
INIS
- Country of Publication
- Russian Federation
- Country of Input or Organization
- Russian Federation
- INIS RN
- 37064531
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CHEMICAL COMPOSITION; CHROMIUM ALLOYS; COBALT ALLOYS; HEAT RESISTING ALLOYS; MONOCRYSTALS; NICKEL BASE ALLOYS; RHENIUM ALLOYS; STRAIN RATE; TANTALUM ALLOY-T111; TANTALUM ALLOYS; TEMPERATURE RANGE 1000-4000 K; TENSILE PROPERTIES; TIME DEPENDENCE; TUNGSTEN ALLOYS
- Descriptors DEC
- ALLOY-TA90W8HF; ALLOYS; CRYSTALS; HAFNIUM ALLOYS; HEAT RESISTANT MATERIALS; MATERIALS; MECHANICAL PROPERTIES; NICKEL ALLOYS; TANTALUM ALLOYS; TANTALUM BASE ALLOYS; TEMPERATURE RANGE; TRANSITION ELEMENT ALLOYS; TUNGSTEN ALLOYS
Optional Information
- Notes
- 5 refs., 3 figs., 3 tabs.