Published December 2018 | Version v1
Journal article

Phase stability of single phase Al0.12CrNiFeCo high entropy alloy upon irradiation

  • 1. Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States)

Description

Phase stability of NiCoFeCr and Al0.12NiCoFeCr single phase high entropy alloys (HEAs) was studied under 3 MeV Ni2+ irradiation at 500 °C to a fluence of 1 × 1017/cm2 reaching a peak dose of ~100 displacements per atom (dpa). Transmission electron microscopy (TEM) diffraction pattern and scanning transmission electron microscopy-energy dispersive X-Ray spectroscopy (STEM-EDS) were utilized to detect any second phases that formed in the irradiated regions of the specimens. While the single phase of NiCoFeCr alloy has remained stable under the irradiation, the phase in Al0.12NiCoFeCr alloy decomposed into FCC matrix phase, and Ni3Al type nanoprecipitates with L12 ordered structure. On the other hand, in Al0.12NiCoFeCr alloy, the non-irradiated region of the TEM specimen (annealed for 10 h at 500 °C) and the as-cast alloy annealed for 490 h at 500 °C exhibited no such precipitates similar to those observed in the irradiated region. Based upon the thermodynamic stability of these alloys, we propose that radiation-enhanced diffusion under the irradiation accelerated the formation of the Ni3Al type equilibrium phase. Our study clearly demonstrates that the phase stability of HEAs under irradiation should be considered as one of the deciding factors in the materials design and selection for nuclear applications.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.matdes.2018.11.006

Additional details

Identifiers

DOI
10.1016/j.matdes.2018.11.006;
PII
S0264127518308116;

Publishing Information

Journal Title
Materials and Design
Journal Volume
160
Journal Page Range
p. 1208-1216
ISSN
0264-1275
CODEN
MADSD2

Optional Information

Copyright
Copyright (c) 2018 Elsevier Ltd.