Design of a pebble-bed reactor with a slab-type core geometry taking into account an inherently safe after-heat removal
Description
The dissertation presents and discusses a reactor design which, in the event of a loss-of-pressure accident with complete failure of all the heat removal systems, prevents the core to be heated up to temperatures at which damaging of the pebble-type HTR fuel elements sets in. This hypothetical accident characterized by a leaking primary cooling cycle and depressurization down to 1 bar, with simultaneous, complete failure of the heat exchangers, is taken in safety analyses as one of the most serious accidents in a HTGR-type reactor, next to accidents resulting in chemical reactions in the core (air or water ingress). With current HTGR designs, the maximum temperature that will result in a considerable release of fission products is 1600deg C. The reactor design discussed here in such a event permits heat removal from the care just by heat transport and thermal radiation, not requiring any technical, auxiliary systems or components. (orig.)
Availability note (English)
Available from TIB Hannover: DW 1695.Abstract (German)
In der vorliegenden Arbeit wurde ein Reaktor entworfen, der bei einem Druckentlastungsstoerfall mit voelligem Ausfall aller Waermetransportsysteme keine Temperaturen im Kern erreicht, die eine Beschaedigung der kugelfoermigen HTR-Brennelemente bewirken. Dieser hypothetische Stoerfall, bei dem ein Leck im Primaerkreis und ein Abfall des Druckes auf 1 bar mit gleichzeitigem Ausfall der Waermeaustauscher angenommen wird, gilt neben Unfaellen mit chemischen Umsetzungen im Kern (Luft- oder Wassereinbruch) als der schwerwiegendste Schaden bei einem Hochtemperaturreaktor. Die Maximaltemperatur, ab der es zu erheblichen Freisetzungen radioaktiver Spaltprodukte kommt, liegt heute bei 1600deg C. Die Nachzerfallswaerme wird in einem solchen Stoerfall durch reine Waermeleitung und -strahlung aus dem Core abgefuehrt, ohne dass technische Hilfsmittel hierzu erforderlich waeren. (orig.)Additional details
Additional titles
- Original title (German)
- Entwurf eines Kugelhaufen-Hochtemperaturreaktors mit plattenfoermiger Coregeometrie unter besonderer Beruecksichtigung inhaerent sicherer Nachwaermeabfuhreigenschaften
Publishing Information
- Imprint Pagination
- 135 p.
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 23019608
- Subject category
- S21: SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS;
- Resource subtype / Literary indicator
- Thesis, Non-conventional Literature
- Descriptors DEI
- AFTER-HEAT REMOVAL; HTGR TYPE REACTORS; PEBBLE BED REACTORS; PLATES; PRESSURE RELEASE; REACTOR ACCIDENTS; REACTOR CORES; REACTOR SAFETY; SIMULATION; THERMAL CONDUCTIVITY
- Descriptors DEC
- ACCIDENTS; GAS COOLED REACTORS; GRAPHITE MODERATED REACTORS; HOMOGENEOUS REACTORS; PHYSICAL PROPERTIES; REACTOR COMPONENTS; REACTORS; REMOVAL; SAFETY; SOLID HOMOGENEOUS REACTORS; THERMODYNAMIC PROPERTIES