Internal structures and high-velocity frictional properties of Longmenshan fault zone at Shenxigou activated during the 2008 Wenchuan earthquake
Creators
- 1. China Earthquake Administration, State Key Laboratory of Earthquake Dynamics, Institute of Geology (China)
- 2. China Earthquake Administration, National Center for Active Fault Studies, Institute of Geology (China)
- 3. Earthquake Administration of Zhejiang Province (China)
- 4. National Institute of Advanced Industrial Science and Technology, Seismotectonics Research Group, Institute of Earthquake and Volcano Geology (Japan)
Description
This paper reports internal structures of a wide fault zone at Shenxigou, Dujiangyan, Sichuan province, China, and high-velocity frictional properties of the fault gouge collected near the coseismic slip zone during the 2008 Wenchuan earthquake. Vertical offset and horizontal displacement at the trench site were 2.8 m (NW side up) and 4.8 m (right-lateral), respectively. The fault zone formed in Triassic sandstone, siltstone, and shale about 500 m away from the Yingxiu-Beichuan fault, a major fault in the Longmenshan fault system. A trench survey across the coseismic fault, and observations of outcrops and drill cores down to a depth of 57 m revealed that the fault zone consists of fault gouge and fault breccia of about 0.5 and 250–300 m in widths, respectively, and that the fault strikes N62°E and dips 68° to NW. Quaternary conglomerates were recovered beneath the fault in the drilling, so that the fault moved at least 55 m along the coseismic slip zone, experiencing about 18 events of similar sizes. The fault core is composed of grayish gouge (GG) and blackish gouge (BG) with very complex slip-zone structures. BG contains low-crystalline graphite of about 30 %. High-velocity friction experiments were conducted at normal stresses of 0.6–2.1 MPa and slip rates of 0.1–2.1 m/s. Both GG and BG exhibit dramatic slip weakening at constant high slip rates that can be described as an exponential decay from peak friction coefficient μp to steady-state friction coefficient μss over a slip-weakening distance Dc. Deformation of GG and BG is characterized by overlapped slip-zone structures and development of sharp slickenside surfaces, respectively. Comparison of our data with those reported for other outcrops indicates that the high-velocity frictional properties of the Longmenshan fault zones are quite uniform and the high-velocity weakening must have promoted dynamic rupture propagation during the Wenchuan earthquake.
Additional details
Identifiers
Publishing Information
- Journal Title
- Earthquake Science
- Journal Volume
- 27
- Journal Issue
- 5
- Journal Page Range
- p. 499-528
- ISSN
- 1674-4519
INIS
- Country of Publication
- China
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 50023162
- Subject category
- S58: GEOSCIENCES;
- Descriptors DEI
- CHINA; CONGLOMERATES; DEFORMATION; DEPTH; DISTANCE; DRILL CORES; DRILLING; EARTHQUAKES; FRICTION FACTOR; GRAPHITE; PRESSURE RANGE MEGA PA; RUPTURES; SANDSTONES; SHALES; SILTSTONES; SLIP; TRIASSIC PERIOD; WIDTH
- Descriptors DEC
- ASIA; CARBON; DIMENSIONLESS NUMBERS; DIMENSIONS; ELEMENTS; FAILURES; GEOLOGIC AGES; MESOZOIC ERA; MINERALS; NONMETALS; PRESSURE RANGE; ROCKS; SEDIMENTARY ROCKS; SEISMIC EVENTS
Optional Information
- Copyright
- Copyright (c) 2014 The Seismological Society of China, Institute of Geophysics, China Earthquake Administration and Springer-Verlag Berlin Heidelberg