Depth profiles of shallow implanted layers by soft ion sputtering and total-reflection X-ray fluorescence

A new method suitable for depth profiling of shallow layers on different materials is presented. It is based on a soft and planar ion sputtering combined with differential weighing, total-reflection X-ray fluorescence (TXRF) spectrometry and Tolansky interferometry. By means of a stepwise repetition of these techniques it is possible to determine both density/depth and concentration/depth profiles. The respective quantities are expressed in terms inherent only to the sample and traceable to the SI-units or subunits gram, nanometer and mole. It is a unique feature of this method that density/depth profiles can directly be obtained from measurements without any calibration or theoretical approximation. The method is applied to a Si wafer implanted with Co ions of 25 keV energy and a nominal dose of 1x1016 cm-2. The depth resolution is shown to be <3 nm while a total depth of some 100 nm can be reached. The concentration/depth profile is compared with RBS measurements, wet-chemical etching plus TXRF and Monte Carlo simulations. In view of the fact that only similar but not exactly the same samples have been examined by these methods, a good correspondence can be noticed