A wide-range medition system for TRIGA Mark III Reactor

The number of particles emitted by a fission reaction is proportional to the number of fissions generated in the reactor nucleus, what in turn are proportional to the power level of such reactor; this indicates that it is possible could measure the reactor power if the amount of neutrons is measured, or the density of the neutron flux. The power measurement in the reactor is necessary in order to have a control of the same. Several procedures for power measurement exists, one of them is achieved through neutron flux density measurement, that take place in the chain reaction by means of the flow density measurement. The easiest way in order to achieve the neutron flux density measurement is carry out by means of the employment of neutron detectors. To the exit of these detectors an electric pulse taks place every time that a neutron interacts with the sensitive detector part. The work here presented, concrete to the construction of a system of measurement of the nuclear power reactor, that is based on the neutron flux applying some techniques of the neutron noise analysis. (Author)