Published 2018 | Version v1
Journal article

Features of surface modification of copper-based alloys under powerful plasma exposures

  • 1. National Science Center "Kharkov Institute of Physics and Technology", Institute of Plasma Physics, Kharkiv (Ukraine)
  • 2. V.N. Karazin Kharkiv National University, Kharkiv (Ukraine)
  • 3. National Technical University "Kharkiv Polytechnical Institute", Kharkiv (Ukraine)

Description

Paper presents features of plasma alloying of Cu-based materials with Ti-Cr, Ti-Cr-Ti-Nb, Ti-Cr-Ti-Zr, Ti-Cr-Ti-ZrO coatings in different regimes of the QSPA Kh-50. Targets were made from copper samples covered of multilayer PVD coatings have been deposited within a Bulat-type facility. Prepared targets were irradiated with powerful plasma streams with energy loads achieved 0.6 MJ/m2 and the pulse duration of 0.25 ms. Influence of plasma impacts on modification different copper alloys has been analyzed. Mechanisms of modification of thin multilayered coatings mixed with Cu substrate in a liquid phase under the plasma processing are evaluated.

Additional details

Publishing Information

Journal Title
Voprosy Atomnoj Nauki i Tekhniki
Journal Issue
no.6-118
Journal Page Range
p. 143-146
ISSN
1562-6016