Spin-rotating magnet for the Δσ_L(np) experiment at LHEP JINR

The spin rotating magnet (SRM) is purposed for the orientation rotation of the nucleon spins in the polarized beam from the transverse (T) direction with respect to the nucleon beam momentum to the longitudinal (L) one. The longitudinally polarized neutron beam was used in the experiment for measuring the total cross section difference Δσ_L(np) with parallel and antiparallel orientation of the participant L polarization. To perform the nucleon spin rotation in the polarized nucleon beam through the angle of 90° over the beam momentum region of ∼1.8–5.5 GeV/c, a proper spin rotation device had to be prepared. For this purpose, the necessary calculations of corresponding values of the magnetic induction integral were carried out. Using the calculations the dipole magnet SP 57 type was chosen for the Δσ_L(np) experiment and the required reconstruction of its pole tips was also accomplished. After the SRM installation at the neutron beam line the appropriate apparatus set for the magnetic measurements was prepared and the precise measurements of the whole set of the SRM characteristics were performed. The obtained results for the SRM magnetic field parameters were successfully used during the Δσ_L(np) experimental runs to specify the current at this magnet coil corresponding to the calculated magnetic induction integral for the given neutron beam momentum.