Review of Software Reliability Assessment Methodologies for Digital I and C Software of Nuclear Power Plants

Digital instrumentation and control (I and C) systems are increasingly being applied to current nuclear power plants (NPPs) due to its advantages; zero drift, advanced data calculation capacity, and design flexibility. Accordingly, safety issues of software that is main part of the digital I and C system have been raised. As with hardware components, the software failure in NPPs could lead to a large disaster, therefore failure rate test and reliability assessment of software should be properly performed, and after that adopted in NPPs. However, the reliability assessment of the software is quite different with that of hardware, owing to the nature difference between software and hardware. The one of the most different thing is that the software failures arising from design faults as 'error crystal', whereas the hardware failures are caused by deficiencies in design, production, and maintenance. For this reason, software reliability assessment has been focused on the optimal release time considering the economy. However, the safety goal and public acceptance of the NPPs is so distinctive with other industries that the software in NPPs is dependent on reliability quantitative value rather than economy. The safety goal of NPPs compared to other industries is exceptionally high, so conventional methodologies on software reliability assessment already used in other industries could not adjust to safety goal of NPPs. Thus, the new reliability assessment methodology of the software of digital I and C on NPPs need to be developed. In this paper, existing software reliability assessment methodologies are reviewed to obtain the pros and cons of them, and then to assess the usefulness of each method to software of NPPs