Published June 2021 | Version v1
Book

DIN 6847-2:2021-06: medical electron accelerators. Pt. 2: structural requirements for radiation protection and requirements for testing of approval conditions for operation

Description

This document is applicable to the construction of electron accelerator facilities for the application of bremsstrahlung with limiting energies between 3 MeV and 50 MeV and electron radiation with energies between 3 MeV and 50 MeV in medical radiation therapy. The document shall also be applied for the operation of electron accelerator facilities operated in the mode without compensation filter and for the application in intensity modulated radiotherapy (IMRT). This document is not applicable to the construction of electron accelerator facilities for use in tomotherapy and robot-assisted radiotherapy. The responsible national standardisation body is the working committee NA 080-00-02 AA "Radiation protection" in the DIN Standards Committee Radiology (NAR). This document supersedes DIN 6847-2:2014-03. Compared to DIN 6847-2:2014-03, the following changes have been made: a) change of title; b) adaptation to the new radiation protection law; c) change of directional factors and stay factors; d) inclusion of considerations on skyshine; e) inclusion of a statement on air activation; f) revision of sections 12 and 13; g) inclusion of tables on Figure 3, Figure 4 and Figure 5.

Availability note (English)

Available from: http://dx.doi.org/10.31030/3252163

Abstract (German)

Dieses Dokument ist anzuwenden für die Errichtung von Elektronenbeschleuniger-Anlagen zur Anwendung von Bremsstrahlung mit Grenzenergien zwischen 3 MeV und 50 MeV und Elektronenstrahlung mit Energien zwischen 3 MeV und 50 MeV bei der medizinischen Strahlenbehandlung. Das Dokument ist auch für den Betrieb von Elektronenbeschleuniger-Anlagen, die im Modus ohne Ausgleichsfilter und für die Anwendung in der fluenzmodulierten Strahlentherapie (englisch: intensity modulated radiotherapy, IMRT) betrieben werden, anzuwenden. Dieses Dokument ist nicht für die Errichtung von Elektronenbeschleuniger-Anlagen zur Anwendung in der Tomotherapie und robotergestützten Strahlentherapie anzuwenden. Das zuständige nationale Normungsgremium ist der Arbeitsausschuss NA 080-00-02 AA "Strahlenschutz" im DIN-Normenausschuss Radiologie (NAR). Dieses Dokument ersetzt DIN 6847-2:2014-03. Gegenüber DIN 6847-2:2014-03 wurden folgende Änderungen vorgenommen: a) Änderung des Titels; b) Anpassung an das neue Strahlenschutzrecht; c) Änderung von Richtungsfaktoren und Aufenthaltsfaktoren; d) Aufnahme von Überlegungen zum Skyshine; e) Aufnahme einer Erklärung zur Luftaktivierung; f) Überarbeitung der Abschnitte 12 und 13; g) Aufnahme von Tabellen zu Bild 3, Bild 4 und Bild 5.

Additional details

Additional titles

Original title (German)
DIN 6847-2:2021-06: Medizinische Elektronenbeschleuniger-Anlagen. T. 2: Bautechnische Anforderungen an den Strahlenschutz und Festlegungen zur Prüfung von Genehmigungsvoraussetzungen für den Betrieb

Identifiers

Publishing Information

Publisher
Beuth
Imprint Place
Berlin (Germany)
Imprint Pagination
53 p.