Published September 1, 2015 | Version v1
Journal article

Laser ablation of titanium in liquid in external electric field

  • 1. The Federal State Educational Institution of Higher Professional Education, "Moscow Institute of Physics and Technology (State University)", 9 Institutskiy per., 141700, Dolgoprudny, Moscow Region (Russian Federation)
  • 2. Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation)
  • 3. National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 31, Kashirskoye Highway, 115409 Moscow (Russian Federation)
  • 4. A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation)

Description

Highlights: • Ablation of a bulk Ti target by 10 ps laser pulses in liquid is experimentally studied in external DC electric field. • Applied cathodic bias leads to increase in average size of self-organized nanostructures formed upon ablation of titanium target. • Laser ablation of Ti target in external electric field results in generation of elongated titanium oxide nanoparticles. - Abstract: Ablation of a bulk Ti target by 10 ps laser pulses in water is experimentally studied in external DC electric field. It is demonstrated that both lateral size of nanostructures (NS) on Ti surface and their density depend on the electric field applied to the target. Scanning Electron Microscopy of NS reveals the shift of their size distribution function toward larger sizes with applied field (cathodic bias, 25 V DC). Density of mushroom-like NS with applied electric field amounts to 1010 cm−2. X-ray diffraction of generated nanoparticles (NPs) shows difference in the crystallographic structure of NPs of non-stoichiometric Ti oxides generated with and without electric field. This conclusion is corroborated with the optical absorption spectroscopy of obtained colloids. Transmission Electron Microscopy of NPs also shows difference in morphology of particles produced with and without cathodic bias. The results are interpreted on the basis of instability of the melt on Ti surface in the electric field

Availability note (English)

Available from http://dx.doi.org/10.1016/j.apsusc.2014.12.139

Additional details

Identifiers

DOI
10.1016/j.apsusc.2014.12.139;
PII
S0169-4332(14)02865-7;

Publishing Information

Journal Title
Applied Surface Science
Journal Volume
348
Journal Page Range
p. 16-21
ISSN
0169-4332
CODEN
ASUSEE

Optional Information

Copyright
Copyright (c) 2014 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.