Published April 21, 1978 | Version v1
Report Open

Analysis of fission products emission of a leaking fuel pin. Thermal cycling effect

Description

Experimental study of fission products release mechanism of a fuel pin with a previous leak in the primary coolant circuit of a PWR. The zircaloy 4 cladding, containing uranium dioxide, has a leak 0.3-0.5 mm in diameter near the plug and is irradiated in a pressurized water loop (at 130 bars) in a temperature range 300-3300C. Fission products analysis is performed by gamma spectrometry. Rare gases and iodines production and composition are studied versus the linear power between 200 and 500 W/cm and the thermal cycling

Availability note (English)

MF available from INIS under the Report Number.

Abstract (French)

Les travaux experimentaux presentes sont relatifs a l'etude des mecanismes d'emission des produits de fission par un crayon presentant un defaut initial d'etancheite dans le circuit primaire d'un reacteur PWR. La gaine en zircaloy 4 contenant les pastilles de dioxyde d'uranium presente un defaut d'etancheite de 0,3 a 0,5 mm de diametre pres du bouchon. Les irradiations ont ete conduites dans une boucle a eau pressurisee a 130 bars a une temperature de 300 a 3300C. L'analyse des produits de fission est effectuee par spectrometrie gamma. On determine l'evolution des gaz rares et des iodes en fonction de la puissance lineaire entre 200 et 500 W/cm et des cyclages thermiques

Files

10483979.pdf

Files (307.2 kB)

Name Size Download all
md5:0dc39dca018c4416d3c01980f34e7571
307.2 kB Preview Download

Additional details

Additional titles

Original title (French)
Analyse de l'emission des produits de fission par un crayon presentant un defaut d'etancheite effet du cyclage thermique
Augmented title (English)
gamma spectrometry

Publishing Information

Imprint Pagination
8 p.
Report number
CEA-CONF--4423

Conference

Title
ENS/ANS international topical meeting on nuclear power reactor safety.
Dates
16 - 19 Oct 1978.
Place
Brussels, Belgium.