First-wall and limiter conditioning in TFTR

A progress report on the experimental studies of vacuum vessel conditioning during the first year of TFTR operation is presented. A previous paper described the efforts expended to condition the TFTR vessel prior to and during the initial plasma start-up experiments. During the start-up phase, discharge cleaning was performed with the vessel at room temperature. For the second phase of TFTR operations, which was directed towards the optimization of ohmically heated plasmas, the vacuum vessel could be heated to 1500C. The internal configuration of the TFTR vessel was more complex during the second phase with the addition of a TiC/C moveable limiter array, Inconel bellows cover plates, and ZrAl getter pumps. A quantitative comparison is given on the effectiveness of vessel bakeout, glow discharge cleaning, and pulse discharge cleaning in terms of the total quantity of removed carbon and oxygen, residual gas base pressures and the resulting plasma impurity levels as measured by visible, uv, and soft x-ray spectroscopy. The initial experience with hydrogen isotope changeover in TFTR is presented including the results of the attempt to hasten the changeover time by using a glow discharge to precondition the vessel with the new isotope