Interference phenomena in azeotropic distillation for liquid scintillation measurement

The Cryogenic Pilot is an experimental project in the national nuclear energy research program, which has the aim of developing technologies for tritium and deuterium separation by cryogenic distillation. The process used in this installation is based on a combined method for liquid-phase catalytic exchange (LPCE) and cryogenic distillation. There are two ways in which the Cryogenic Pilot can interact with the environment: by atmospheric release and through the sewage system. In order to establish the base level of tritium concentration in the environment around the nuclear facilities, we investigated the sample preparation treatment for different types of samples: spinach, spring wheat, onion, hay, grass, apple, garden lettuce, soil, milk, and meat. For the azeotropic distillation of all types of samples two solvents were used, toluene and cyclohexane, and all measurements for the determination of environmental tritium concentration was carried out using liquid scintillation counting (LSC), with ultra-low liquid scintillation spectrometer Quantulus 1220, specially designed for environmental samples and low radioactivity. Sample scintillation cocktail ratio was 8:12 ml and liquid scintillation cocktail was UltimaGold LLT. The background determined for the prepared blank samples was between 0.926 CPM and 1.002 CPM and the counting efficiency between 25.37% and 26.10%. The counting time was 1000 minutes (50 minutes/20 cycles) for each sample, and the minimum detectable activity according to ISO 9698 was 8.9 TU and 9.05 TU, respectively with a confidence factor of 3