A metal organic framework prepared from benzene-1,3,5-tricarboxylic acid and copper(II), and functionalized with various polysulfides as a sorbent for selective sorption of trace amounts of heavy metal ions

Novel composites were obtained via direct assembly of polysulfides (S_x²⁻, X = 3, 4, 6) on the surface of a metal organic framework (MOF; type benzene-1,3,5-tricarboxylic/Cu(II). They are referred to as S_x-MOFs and were used for highly selective and efficient extraction of ultra-trace amounts of heavy metal ions from aqueous solutions. The structure of the S_x-MOFs was characterized by Raman spectroscopy, FT-IR, X-ray diffraction, and scanning electron microscopy. The Raman spectra of S_x-MOF is similar to the bare MOF and shows the MOFs structure to be well retained after S_x functionalization. The selective interaction of S_x with soft metal ions and the high surface area of MOFs resulted in excellent affinity and selectivity for ions such as Hg(II). The S_x-MOFs of type S₄-MOF had the highest distribution coefficient K_d value (~10⁷) and best extraction recovery (~100%) for Hg(II). The S₄-MOF also has high selectivity in the following order: Hg(II) > > Pb(II) > Zn(II) > Ni(II) > Co(II). The binding process of the metals occurs via M–S bonding. The ions were quantified by inductively coupled plasma optical emission spectrometry (ICP-OES). The detection limit for Hg(II) is 0.13 μg L⁻¹. The S₄-MOF was applied to the extraction of trace metal ions from natural and contaminated waters and data were compared with other sorbets. The results revealed that S₄-MOF is an excellent adsorbent for sorption of heavy metal ions even in the presence of the relatively high concentration of other ions. .