Published November 1987
| Version v1
Journal article
High-voltage nanosecond pulse shaper
Description
A high-voltage pulse shaper with an output of up to 250 kV, a base duration of ∼ 10 nsec, and a repetition frequency of 50 pulses/sec is described. The described high-voltage nanosecond pulse shaper is designed for one-orbit extraction of an electron beam from a betatron. A diagram of the pulse shaper, which employs a single-stage generator is shown. The shaping element is a low-inductance capacitor bank of series-parallel KVI-3 (2200 pF at 10 kV) or K15-10 (4700 pF at 31.5 kV) disk ceramic capacitors. Four capacitors are connected in parallel and up to 25 are connected in series
Additional details
Publishing Information
- Journal Title
- Instrum. Exp. Tech. (Engl. Transl.)
- Journal Volume
- 30
- Journal Issue
- 3
- Series
- Instrum. Exp. Tech. (Engl. Transl.).
- Journal Page Range
- 608-612
- ISSN
- 0020-4412
- CODEN
- INETA
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 19084244
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Translation
- Descriptors DEI
- BEAM EXTRACTION; BEAM PRODUCTION; BETATRONS; CALIBRATION; CAPACITORS; ELECTRON BEAMS; HIGH-VOLTAGE PULSE GENERATORS; KEV RANGE 100-1000; PERFORMANCE; PULSE SHAPERS; TIMING PROPERTIES
- Descriptors DEC
- ACCELERATORS; BEAMS; CYCLIC ACCELERATORS; ELECTRICAL EQUIPMENT; ELECTRONIC CIRCUITS; ELECTRONIC EQUIPMENT; ENERGY RANGE; ENERGY STORAGE SYSTEMS; EQUIPMENT; FUNCTION GENERATORS; KEV RANGE; LEPTON BEAMS; PARTICLE BEAMS; PULSE CIRCUITS; PULSE GENERATORS
Optional Information
- Notes
- Translated from Prib. Tekh. Eksp.; 30: No. 3, 103-106(May-Jun 1987).