Published November 1, 2016 | Version v1
Journal article

Investigation of Ni-Cr-Si-Fe-B coatings produced by the electron beam cladding technique

  • 1. Material Science in Mechanical Engineering Department, Novosibirsk State Technical University, 20 Prospekt K.Marksa, Novosibirsk, 630073 (Russian Federation)
  • 2. Budker Institute of Nuclear Physics of Siberian Branch Russian Academy of Sciences,11 Prospekt Akademika Lavrentieva, Novosibirsk, 630090 (Russian Federation)

Description

This paper presents the results of structural investigations and results of tribological and microhardness tests of the coating obtained by electron beam cladding of a Ni-Cr-Si-Fe-B self-fluxing alloy on low-carbon steel. After electron beam treatment high-quality dense layer with a thickness of 1.2-1.8 mm was obtained. The structure of the coating consisted of dendrite crystals based on y-Ni-solid solution and eutectic with complex composition. Microhardness of the coating achieves 370 HV. Wear-resistance of the coating obtained by electron-beam cladding technique was 1.6-fold higher than that of low-carbon carburized steel. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/156/1/012017

Additional details

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
156
Journal Issue
1
Journal Page Range
[4 p.]
ISSN
1757-899X

Conference

Title
International conference and youth scientific school on materials and technologies of new generations in modern materials science
Dates
9-11 Jun 2016
Place
Tomsk (Russian Federation)