Epoxidised Natural Rubber Based Composite Polymer Electrolyte Systems For Use In Electrochemical Device Applications

Composite polymer electrolyte (CPE) comprising epoxy-fimctionalized rubber (ENR), HDDA monomer, mixed plasticizer-propylene carbonate/ethylene carbonate, silica filler and lithium bis(trifluoromethanesulfonylimide), Li[(CF3SO2)2N]have been prepared using photo-induced polymerization by UV irradiation technique. The irradiated samples of filled and non-filled silica of composites electrolytes have formed dry solid-flexible and transparent films in the self-constructed Teflon mould. Thermal behaviors, FTIR, morphology and ionic conductivity were performed on such ENR based PE polymer composites having varied compositions. The thermal stability has improved slightly in the temperature range 120-200 deg. C with optimized composition. FTIR measurements data revealed that the interaction of lithium with the epoxy groups of the un-bonded electrons within polymer occurred. The results suggest that the variation of conductivity with temperature indicates that the silica filled composite has achieved optimal ionic conductivity 10-4 S cm-1 and retained high percent of plasticizer. The ionic conductivity behavior of the silica-filled ENR based composite polymer electrolyte is consistent at elevated temperature compared to non-filled CPE system. This finding opens a new pathway for further investigation to diffusion of ions in the complex polymer electrolyte systems.