Improve wear resistance of PA1010 by O+ ion implanted
Creators
- 1. Nanjing Univ. of Science and Technology, Nanjing (China). Dept. of Material Science and Engineering
Description
The PA1010 was implanted with O+ at different energies and doses. The friction and wear behaviors of the ion implanted PA1010 disk rubbing with HastC balls were studied using a pin -on -disk tribometer under dry friction and distilled lubrication condition. SEM examined the surfaces of un-implanted and implanted PA1010 before and after wear. The results show that the wear resistance of PA1010 is increased with several kinds of implantation technologies and raising implanted energy is more efficient than increasing implanted doses for increasing wear resistance of PA1010. The wear of the HastC is increased with decreasing wear of implanted PA1010. The adhesive, plow and plastic deformation is wearing mechanism for un-implanted PA1010 and fatigue, abrasive wear for implanted PA1010
Additional details
Publishing Information
- Journal Title
- High Technology Letters
- Journal Volume
- 12
- Journal Issue
- 5
- Journal Page Range
- p. 60-63
- ISSN
- 1002-0470
INIS
- Country of Publication
- China
- Country of Input or Organization
- China
- INIS RN
- 34043806
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- FRICTION; ION IMPLANTATION; KEV RANGE 100-1000; MATERIALS WORKING; NYLON; OXYGEN IONS; PERFORMANCE TESTING; RADIATION DOSES; SCANNING ELECTRON MICROSCOPY; WEAR; WEAR RESISTANCE
- Descriptors DEC
- CHARGED PARTICLES; DOSES; ELECTRON MICROSCOPY; ENERGY RANGE; FABRICATION; IONS; KEV RANGE; MATERIALS; MECHANICAL PROPERTIES; MICROSCOPY; ORGANIC COMPOUNDS; ORGANIC POLYMERS; PETROCHEMICALS; PETROLEUM PRODUCTS; PLASTICS; POLYAMIDES; POLYMERS; SYNTHETIC MATERIALS; TESTING