Determination of AKR-2 leakage beam and verification at iron and water arrangements

In this paper computational procedures and the experimental determination of the AKR-2 (Technical University Dresden) beam parameters are described. The calculations were performed using the MCNPX code () and the nuclear data libraries ENDF/B VI.2., ENDF/B VII.0., JEFF 3.1., JENDL 3.3 and BROND 3. The nuclear data were processed using the NJOY code (). The measurements were performed with a two-parameter stilbene spectrometer (). The measured leakage neutron spectrum was used as the input spectrum for the resulting neutron transport calculations. Because of the poor energy resolution of the experimental spectra the calculated photon leakage spectrum was used as the resulting input spectrum for the photon transport calculations. As the geometrically simple models acceptable for validation, transport through a 25 cm thick iron target and a 20 cm thick water target were used. Both targets were placed at the horizontal channel of the reactor AKR-2.