Direct characterization of airborne particles associated with arsenic-rich mine tailings: Particle size, mineralogy and texture

Highlights: → Airborne dust from As-rich gold mine tailings used for recreation was collected. → Total concentrations of arsenic in the <8 μm fraction varied from 65 to 1040 ng/m3. → Multiple As minerals in dust are comparable with near-surface tailings samples. - Abstract: Windblown and vehicle-raised dust from unvegetated mine tailings can be a human health risk. Airborne particles from As-rich abandoned Au mine tailings from Nova Scotia, Canada have been characterized in terms of particle size, As concentration, As oxidation state, mineral species and texture. Samples were collected in seven aerodynamically fractionated size ranges (0.5-16 μm) using a cascade impactor deployed at three tailings fields. All three sites are used for recreational activities and off-road vehicles were racing on the tailings at two mines during sample collection. Total concentrations of As in the <8 μm fraction varied from 65 to 1040 ng/m3 of air as measured by proton-induced X-ray emission (PIXE) analysis. The same samples were analysed by synchrotron-based microfocused X-ray absorption near-edge spectroscopy (μXANES) and X-ray diffraction (μXRD) and found to contain multiple As-bearing mineral species, including Fe-As weathering products. The As species present in the dust were similar to those observed in the near-surface tailings. The action of vehicles on the tailings surface may disaggregate material cemented with Fe arsenate and contribute additional fine-grained As-rich particles to airborne dust. Results from this study can be used to help assess the potential human health risks associated with exposure to airborne particles from mine tailings.