Published August 1, 2018 | Version v1
Journal article Metadata-only

Effect of coating on erosion wear: An experimental investigation

Creators

  • 1. Faculty of Mechanical Engineering, Sri Ramswaroop Memorial University, Lucknow India (India)

Description

Two stainless steels namely AISI 430 and AISI 204 have been investigated for their slurry erosion resistance. The erosion tests were carried out using a pot tester at the particle impact velocity of 10.7 m/s, slurry concentration of 10%, 20% and 30% by weight and the impingement angle of 30° and 90°. To improve the slurry erosion resistance of the stainless steel AISI 430 and AISI 204, Cr3C2-25NiCr coating was deposited on that, using HVOF (High Velocity Oxy Fuel) technique. Erosion results show that Cr3C2-25NiCr coating exhibits better slurry erosion resistance than the AISI 430 and AISI 204. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/402/1/012117

Additional details

Identifiers

DOI
10.1088/1757-899X/402/1/012117;

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
402
Journal Issue
1
Journal Page Range
[9 p.]
ISSN
1757-899X

Conference

Title
1. International Conference on Contemporary Research in Mechanical Engineering with Focus on Materials and Manufacturing
Acronym
ICCRME-2018
Dates
6-7 Apr 2018
Place
Lucknow (India)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
52094620
Subject category
S36: MATERIALS SCIENCE;
Resource subtype / Literary indicator
Conference
Descriptors DEI
CHROMIUM CARBIDES; COATINGS; CONCENTRATION RATIO; DEPOSITS; EROSION; IMPINGEMENT; SLURRIES; STAINLESS STEELS; WEAR
Descriptors DEC
ALLOYS; CARBIDES; CARBON ADDITIONS; CARBON COMPOUNDS; CHROMIUM COMPOUNDS; DIMENSIONLESS NUMBERS; DISPERSIONS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MIXTURES; STEELS; SUSPENSIONS; TRANSITION ELEMENT ALLOYS; TRANSITION ELEMENT COMPOUNDS