Published October 1, 2017 | Version v1
Journal article

An efficient method exploiting the waste heat from a direct carbon fuel cell by means of a thermophotovoltaic cell

  • 1. Department of Physics, Xiamen University, Xiamen 361005 (China)
  • 2. School of Energy Research, Xiamen University, Xiamen 361005 (China)

Description

Highlights: • A new direct carbon fuel cell-thermophotovoltaic cell hybrid system is established. • The waste heat from a direct carbon fuel cell can be efficiently exploited. • The maximum power output density of the hybrid system is calculated. • Lower and upper bounds of optimized parameters are determined. • Performances of several direct carbon fuel cell-based hybrid systems are compared. - Abstract: Based on the current models of the direct carbon fuel cell and thermophotovoltaic cell, a new hybrid system is proposed to efficiently exploit the waste heat from a direct carbon fuel cell by terms of a thermophotovoltaic cell. The expressions of the power output and the efficiency of the hybrid system are analytically derived and the maximum power output density is numerically calculated. It is found that under some given conditions, the maximum power output density of the hybrid system can attain 734.7 W m−2, which is more than 2 times of that of a single direct carbon fuel cell. Moreover, the optimal region of the hybrid system is determined through the introduction of a new objective function (i.e., the product of the efficiency and the power output). The selective criteria of some key parameters such as the power output density, efficiency, current density of the direct carbon fuel cell, and area ratio of the direct carbon fuel cell to the thermophotovoltaic cell are provided. The effects of the carbon particle slabs in the packed bed anode of the fuel cell on some key parameters are discussed. The maximum power output density of the hybrid system under the differently operating temperatures of the direct carbon fuel cell are calculated and compared with those of other direct carbon fuel cell-based hybrid systems. The results of this study indicate that the thermophotovoltaic cell can efficiently harvest the waste heat produced in the direct carbon fuel cell and the direct carbon fuel cell-thermophotovoltaic cell hybrid system have some obvious advantages over other direct carbon fuel cell-based hybrid systems.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.enconman.2017.07.040

Additional details

Identifiers

DOI
10.1016/j.enconman.2017.07.040;
PII
S0196-8904(17)30675-1;

Publishing Information

Journal Title
Energy Conversion and Management
Journal Volume
149
Journal Page Range
p. 424-431
ISSN
0196-8904
CODEN
ECMADL

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
49047988
Subject category
S29: ENERGY PLANNING, POLICY AND ECONOMY;
Descriptors DEI
CARBON; CURRENT DENSITY; ENERGY EFFICIENCY; FUEL CELLS; HYBRID SYSTEMS; HYBRIDIZATION; PACKED BEDS; WASTE HEAT
Descriptors DEC
DIRECT ENERGY CONVERTERS; EFFICIENCY; ELECTROCHEMICAL CELLS; ELEMENTS; ENERGY; HEAT; NONMETALS; WASTES

Optional Information

Copyright
Copyright (c) 2017 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.