Problems of materials and finishing in the production of straight-tube heat exchangers
Creators
- 1. Babcock - Brown Boveri Reaktor G.m.b.H., Mannheim (F.R. Germany)
Description
The straight-tube steam generator with forced circulation and integrated economiser is an advanced type of heat exchanger for PWR reactors. The materials for its components are the same as for U-tube steam generators. The use of Inconel 600 as a piping material has been a matter of controversy in Germany in the last few years, and extensive studies on stress crack corrosion have therefore been caried out. Information obtained in worldwide laboratory tests and operational experience proves that Inconel 600 is the best of all available materials for the tubes of straight-tube steam generators. The heat treatment at 6000C of the finished steam generator during stress relief annealing improves its resistance to stress crack corrosion and lowers the residual stresses until they are well below the threshold value inducing stress crack corrosion. (GSCH)
Abstract (German)
Der Geradrohrdampferzeuger mit Zwangsdurchlauf und integriertem Ekonomiser stellt einen fortschrittlichen Entwurf eines Waermetauschers fuer Druckwasserreaktoren dar. Die Werkstoffe der Bauteile unterscheiden sich von denen fuer U-Rohrdampferzeuger nicht. Da die Verwendung von Inconel 600 als Rohrwerkstoff in Deutschland in den letzten Jahren umstritten war, wurden eingehende Untersuchungen ueber die Spannungsrisskorrosion durchgefuehrt. Die zunehmende Kenntnis aus Laborversuchen und Betriebserfahrungen in der ganzen Welt untermauert die Ansicht, dass Inconel 600 der geeignetste Rohrwerkstoff fuer den Geradrohrdampferzeuger ist. Die Waermebehandlung bei 6000C, die der fertige Dampferzeuger beim Spannungsarmgluehen druchlaeuft, verbessert die Bestaendigkeit gegen Spannungsrisskorrosion und senkt die Eigenspannungen, so dass diese weit unter der bekannten Spannungsschwelle zur Ausloesung der Spannungsrisskorrosion liegen. (GSCH)Additional details
Additional titles
- Original title (German)
- Werkstoff- und Fertigungsfragen bei der Herstellung von Geradrohrdampferzeugern
Publishing Information
- Imprint Title
- VGB conference on materials and welding in power plants 1974 - VGB materials conference 1974
- Imprint Pagination
- p. 4-36.
- Report number
- AED-Conf--74-570-000
Conference
- Title
- VGB conference on materials and welding in power plants - VGB materials conference.
- Dates
- 26 Nov 1974.
- Place
- Duesseldorf, F.R. Germany.
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 7279239
- Subject category
- S21: SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS;
- Resource subtype / Literary indicator
- Conference, Non-conventional Literature
- Descriptors DEI
- ANNEALING; FABRICATION; HEAT EXCHANGERS; HIGH TEMPERATURE; INCONEL 600; REACTOR COMPONENTS; STEAM GENERATORS; STRESS CORROSION
- Descriptors DEC
- ALLOYS; BOILERS; CHEMICAL REACTIONS; CHROMIUM ALLOYS; CORROSION; HEAT TREATMENTS; INCONEL ALLOYS; IRON ALLOYS; NICKEL ALLOYS; NICKEL BASE ALLOYS; NIOBIUM ALLOYS; TRANSITION ELEMENT ALLOYS; VAPOR GENERATORS
Optional Information
- Notes
- 17 figs.; 3 tabs.; 21 refs. Available from ZAED. Imprint:VGB-Konferenz Werkstoffe und Schweisstechnik im Kraftwerk 1974 - VGB Werkstofftagung 1974.;Vortraege.