Estimation of subsurface hydrological parameters around Akwuke, Enugu, Nigeria using surface resistivity measurements

As few boreholes may be available and carrying out pumping tests can be expensive and time consuming, relationships between aquifer characteristics and the electrical parameters of different geoelectric layers exist. Data from 19 vertical electrical soundings (VESs; 13 of these selected for evaluation) was recorded with a Schlumberger electrode configuration in the area around Akwuke, Enugu, Nigeria. The data was interpreted by computer iterative modelling with curve matching for calibration purposes. Geoelectric cross-sections along a number of lines were prepared to ascertain the overall distribution of the resistivity responses of the subsurface lithology. Identified probable shallow aquifer resistivity, thickness and depth values are in the range of 28–527 Ωm, 2.1–22.5 m and 3.1–28.3 m respectively. As our aquifer system consists of fine-grained, clay–silty sand materials, a modification of the Archie equations (Waxman–Smits model) was adopted to determine the true formation factor using the relationship between the apparent formation factor and the pore water resistivity. This representation of the effects of a separate conducting path due to the presence of clay particles in the aquifer materials was used in making reliable estimations of aquifer properties. The average hydraulic conductivity of 8.96 × 10−4 m s−1 transmissivity ranging between 1.88 × 10−3 and 2.02 × 10−3 m2 s−1 estimated from surface resistivity measurements correlated well with the available field data. Results of the study also showed a direct relationship between aquifer transmissivity and modified transverse resistance (R2 = 0.85). (paper)