Published 1977
| Version v1
Book
Study of quality and workability of titanium-nickel alloy ingots
Description
The quality of a cast and deformed alloy of the titanium-nickel system of stoichiometric composition was studied. It has been established by microroentgenospectral analysis and density measurement that the upper part of the ingot is enriched by titanium, while in the middle portion the central zone is enriched by nickel as compared with the periphery. It is shown that the material has a very high plasticity margin in the temperature range from 700 to 900 deg C. The deformed material has a grain size of about 20 μm. At temperatures above 1050 deg C a brittleness zone is revealed, which is due to the fusion of the Ti2Ni-phase along the grain boundary
Additional details
Additional titles
- Original title (Russian)
- Исследование качества слитков и деформируемости сплава системы титан-никель
Publishing Information
- Publisher
- Metallurgiya.
- Imprint Place
- Moscow
- Imprint Title
- General metallurgy and light metal alloy casting
- Journal Page Range
- p. 237-245.
INIS
- Country of Publication
- USSR
- Country of Input or Organization
- USSR
- INIS RN
- 10436674
- Subject category
- S36: MATERIALS SCIENCE; S36: MATERIALS SCIENCE;
- Descriptors DEI
- CASTINGS; DEFORMATION; DENSITY; GRAIN SIZE; INTERMETALLIC COMPOUNDS; NICKEL ALLOYS; PLASTICITY; SPATIAL DISTRIBUTION; TEMPERATURE DEPENDENCE; TENSILE PROPERTIES; TITANIUM ALLOYS
- Descriptors DEC
- ALLOYS; CRYSTAL STRUCTURE; DISTRIBUTION; MECHANICAL PROPERTIES; MICROSTRUCTURE; PHYSICAL PROPERTIES; SIZE; TRANSITION ELEMENT ALLOYS
Optional Information
- Notes
- Imprint:Metallovedenie i lit'e legkikh splavov.