Neutral particle dynamics in the Alcator C-Mod tokamak
Description
This thesis presents an experimental study of neutral particle dynamics in the Alcator C-Mod tokamak. The primary diagnostic used is a set of six neutral pressure gauges, including special-purpose gauges built for in situ tokamak operation. While a low main chamber neutral pressure coincides with high plasma confinement regimes, high divertor pressure is required for heat and particle flux dispersion in future devices such as ITER. Thus we examine conditions that optimize divertor compression, defined here as a divertor-to-midplane pressure ratio. We find both pressures depend primarily on the edge plasma regimes defined by the scrape-off-layer heat transport. While the maximum divertor pressure is achieved at high core plasma densities corresponding to the detached divertor state, the maximum compression is achieved in the high-recycling regime. Variations in the divertor geometry have a weaker effect on the neutral pressures. For otherwise similar plasmas the divertor pressure and compression are maximum when the strike point is at the bottom of the vertical target plate. We introduce a simple flux balance model, which allows us to explain the divertor neutral pressure across a wide range of plasma densities. In particular, high pressure sustained in the detached divertor (despite a considerable drop in the recycling source) can be explained by scattering of neutrals off the cold plasma plugging the divertor throat. Because neutrals are confined in the divertor through scattering and ionization processes (provided the mean-free-paths are much shorter than a typical escape distance) tight mechanical baffling is unnecessary. The analysis suggests that two simple structural modifications may increase the divertor compression in Alcator C-Mod by a factor of about 5. Widening the divertor throat would increase the divertor recycling source, while closing leaks in the divertor structure would eliminate a significant neutral loss mechanism. 146 refs., 82 figs., 14 tabs
Availability note (English)
MF available from INIS under the Report Number; Also available from OSTI as DE96011180; NTIS; US Govt. Printing Office Dep.Files
27064454.pdf
Files
(4.2 MB)
| Name | Size | Download all |
|---|---|---|
|
md5:1e4c6dc6307eb0504d25614737ee1ffa
|
4.2 MB | Preview Download |
Additional details
Publishing Information
- Imprint Pagination
- 291 p.
- Report number
- DOE/ET/51013--314
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 27064454
- Subject category
- S70: PLASMA PHYSICS AND FUSION TECHNOLOGY;
- Resource subtype / Literary indicator
- Thesis
- Descriptors DEI
- ALCATOR DEVICE; MATHEMATICAL MODELS; NEUTRAL-PARTICLE TRANSPORT; PLASMA DIAGNOSTICS; PLASMA PRESSURE; POLOIDAL FIELD DIVERTORS; PRESSURE DEPENDENCE
- Descriptors DEC
- CLOSED PLASMA DEVICES; DIVERTORS; RADIATION TRANSPORT; THERMONUCLEAR DEVICES; TOKAMAK DEVICES
Optional Information
- Contract/Grant/Project number
- Contract AC02-78ET51013
- Funding organization
- USDOE, Washington, DC (United States).
- Secondary number(s)
- PFC/RR--95-8.