Contribution to the damage measurement of reinforced concrete buildings under seismic solicitations: proposal of an improvement for the evaluation of the damaging potential of a signal and of the damage for the girders structures: introduction to the reliability analysis of the damage in terms of the damaging potential of a seismic signal

Building damage measurement during and after an earthquake remains an economical as well as technical stake as difficult to cope with as the problem it raises all the more because its importance depends on the field or the building function: civil, medical, military, nuclear... Even building ruin remains one of the most critical diagnosis to establish. Then since prediction of earthquake still remains impossible, foreseeing structural damages due to seismic motion has become a key point in earthquake engineering. This work aims at evaluating the relevance of classical seismic signal damaging potential indices and at proposing improvement of these indices in order to provide better prediction of structural damage due to earthquake. The first part supplies a non exhaustive state of the art of main Damaging Potential Indices IP and Damage Indices ID used in earthquake engineering. In the second part, IP/ID correlations results are analysed in order to evaluate IP relevance, to justify displacement based approach use (capacity spectrum method) for damage prediction and to make good the proposal for improvement of Damaging Potential Index. But studding seismic signal damaging potential is usually not enough to foresee damage firstly because scalar representation of damaging potential is not easy to link to physics reality and secondly because of damage scattering often observed for a single value of seismic signal damaging potential. In the same way, a single damage index value may correspond to very different structural damage states. Hence, this work carries on with a contribution to damage index reliability improvement, able to detect real structural damage appearance as well as to quantify this damage by associating the distance between one structural sate and the structural collapse, defined as an instability. (author)