Published February 15, 2009 | Version v1
Journal article

Preparation of Ru-loaded CdS/Al-HMS nanocomposites and production of hydrogen by photocatalytic degradation of formic acid

  • 1. College of Material Science and Engineering, Xi'an University of Architecture and Technology, Xi'an 710055 (China)
  • 2. Zhejiang Institute for the Control of Medical Device, Hangzhou 310009 (China)

Description

The composite of aluminum-substituted mesoporous silica (Al-HMS) molecular sieve coupled with CdS (CdS/Al-HMS) was prepared by template, ion exchange and sulfurization reactions. The result of low angle XRD patterns showed that the low content of 2.5 wt% CdS is incorporated inside Al-HMS channels. The results of diffuse reflectance UV-visible spectra and fluorescence emission spectra exhibited that the absorption edge and photoluminescence peak for CdS/Al-HMS are blue-shifted about 75 nm and 40 nm in comparison to bulk CdS, respectively. The activities of hydrogen production by photocatalytic degradation of formic acid were evaluated under visible light irradiation (λ ≥ 420 nm) and the CdS/Al-HMS loaded 0.07 wt% Ru showed the highest H2 evolution at a rate of 3.7 mL h-1 with an apparent quantum yield of 1.2% at 420 nm.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.apsusc.2008.12.019

Additional details

Identifiers

DOI
10.1016/j.apsusc.2008.12.019;
PII
S0169-4332(08)02467-7;

Publishing Information

Journal Title
Applied Surface Science
Journal Volume
255
Journal Issue
9
Journal Page Range
p. 4863-4866
ISSN
0169-4332
CODEN
ASUSEE

Optional Information

Copyright
Copyright (c) 2008 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.