Published November 2011 | Version v1
Journal article

Fabrication of homogeneous titania/MWNT composite materials

  • 1. Department of Applied and Environmental Chemistry, University of Szeged, Rerrich B. ter 1, Szeged H-6720 (Hungary)
  • 2. Department Metallurgy and Materials Engineering (MTM), Katholieke Universiteit Leuven (Belgium)
  • 3. Laboratory of Physics of Complex Matter, Ecole Polytechnique Federale de Lausanne, CH-1015 Lausanne (Switzerland)

Description

Highlights: → Homogenous titania coverage on MWNT surface in a controllable way. → Various titanium alkoxy precursors are suitable for layer formation. → Acetone and ethanol are the best to promote interaction between MWNT and titania. -- Abstract: MWNT/titania nanocomposites were prepared by an impregnation method and subsequent heat treatment at 400 oC. Precursor compounds such as titanium (IV) propoxide and titanium (IV) ethoxide were used to cover the surface of CNTs under solution conditions. Electron microscopy and X-ray diffraction techniques were carried out to characterize the as-prepared titania layers.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.materresbull.2011.07.010

Additional details

Identifiers

DOI
10.1016/j.materresbull.2011.07.010;
PII
S0025-5408(11)00325-4;

Publishing Information

Journal Title
Materials Research Bulletin
Journal Volume
46
Journal Issue
11
Journal Page Range
p. 1991-1996
ISSN
0025-5408
CODEN
MRBUAC

Optional Information

Copyright
Copyright (c) 2011 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.