Regularities in eliminating the porosity in some crystalline and amorphous materials
- 1. Fiziko-Tekhnicheskij Inst. im. A.F. Ioffe RAN, (Russian Federation)
Description
The results of the number of studies on eliminating the porosity under the effect of increased temperatures and pressures performed on the cast alloys (VT5L; AL2), steels (30KhG5N2A) and amorphous alloys (Co59Fe5Si11Ni10B15, Fe61Co20Si5B14, Fe77Ni1Si9B13) are considered. The change in the porosity parameters was controlled through the small-angle X-ray scattering electron microscopy. It is shown that the effect of the hydrostatic pressure leads to decrease in the excessive free volume in the amorphous alloys, related to the availability of the micropores of about 10 nm dimensions and consequently to the increase in the strength, microhardness and temperature of the viscous-brittle transition. It is noted that the acting forces of the microporosity elimination may be related both to the internal stress and the Laplace pressure conditioned by the pores surface curvature
Abstract (Russian)
Рассмотрены результаты ряда исследований по залечиванию пористости под воздействием повышенных температур и давлений, проведенных на литых сплавах (ВТ5Л, АЛ2), сталях (Co59Fe5Si11Ni10B15, Fe61Co20Si5B14, Fe77Ni1Si9B13). Изменение параметров пористости контролировали с помощью малоуглового рассеяния рентгеновских лучей, оптической и сканирующей электронной микроскопии. Показано, что воздействие гидростатического давления ведет к уменьшению избыточного свободного обмена в аморфных сплавах, связанного с наличием микропор размерами около 10 нм и, как следствие, к повышению прочности, микротвердости и температуры вязко-хрупкого перехода. Отмечено, что действующие силы залечивания микропористости могут быть связаны как с внутренними напряжениями, так и с лапласовским давлением, обусловленным кривизной поверхности порAdditional details
Additional titles
- Original title (Russian)
- Закономерности залечивания пористости в некоторых кристаллических и аморфных материалах
Publishing Information
- Journal Title
- Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya
- Journal Issue
- no.8
- Journal Page Range
- p. 65-67
- CODEN
- IVUMAX
INIS
- Country of Publication
- Russian Federation
- Country of Input or Organization
- Russian Federation
- INIS RN
- 36060565
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ACTIVATION ENERGY; ANNEALING; BORON ALLOYS; CASTINGS; COBALT BASE ALLOYS; DEFECTS; DUCTILE-BRITTLE TRANSITIONS; IRON BASE ALLOYS; MASS TRANSFER; MECHANICAL PROPERTIES; METALLIC GLASSES; POROSITY; PRESSURE DEPENDENCE; PRESSURE RANGE GIGA PA; SILICON ALLOYS; TITANIUM BASE ALLOYS; TRANSITION TEMPERATURE
- Descriptors DEC
- ALLOYS; COBALT ALLOYS; ENERGY; HEAT TREATMENTS; IRON ALLOYS; PHYSICAL PROPERTIES; PRESSURE RANGE; THERMODYNAMIC PROPERTIES; TITANIUM ALLOYS; TRANSITION ELEMENT ALLOYS
Optional Information
- Notes
- 21 refs.